Eclipse Panel TWC

The PROLIGHTS ECLIPSE Panel Tunable White & Colour is a LED soft panel / soft light which provides a beautiful, wide source of soft and precise colours.



Description

In addition to this the PROLIGHTS ECLIPSE PANEL TWC comes with a full range white reproduction from daylight through to Tungsten tones, reaching a superior light quality with High CRI, TLCI and TM-30. The ECLIPSE PANEL allows for quick and accurate adjustment of light through 3 local knobs with two fully featured modes: CCT with +/- green and magenta shift, and HSI for total control of hue, saturation and intensity. The unit can also be controlled on a per section basis, to allow for the reproduction of onboard customisable effects or to be run through the lighting desk. Both methods provide eye-candy, with the appealing and modern front looks and cinematic special effects. The unit is packaged with an onboard driver and built-in power supply and being lightweight, the ECLIPSE PANEL offers easy rigging and cabling making it the perfect lighting tool for every location.

Features:

  • 740W RGB+ Warm White LED source
  • CRI > 94; R9 > 92; TLCI > 94
  • Controllable in pixel section to generate static and dynamic pixel effects
  • Variety of fan settings
  • Battery ready, compatible with industry-standard external batteries (optional)

 

Accessories available for the Eclipse Panel are:

60 degree egg crate (MUSECL211)

30 degree egg crate (MUSECL210)

8 chamber egg crate (MUSECL215)

 

LIGHT SOURCE

  • Source: 740W RGB + Warm White
  • CT: 2.80 0K – 10.000K
  • CRI: > 94
  • R9: > 92
  • Luminous flux: 29’000lm
  • Lux: 1’370lx @3 m full
  • Lux: 500lx @5 m full
  • Source life expectancy: >50.000 h
  • Other: TM-30-15RF/RG: 83/112 – TLCI: 94,4

 

OPTICS

  • Beam angle: 100°
  • Field angle: 155°
  • Lens type: holographic frost filter
  • Additional optics: interchangeable and different optional filter to adjust the beam spread
  • Other: spigot (included); 30° egg craft (optional); 60° egg craft (optional); eggcrate (optional); barndoors (optional)

 

COLOUR SYSTEM

  • Colour mixing: RGB + WW
  • CTC: CTC control through independent DMX channel, + / – green and magenta correction and amber shift activation by DMX
  • White presets: 2.800 K – 10.000K
  • Colour wheel: virtual colour wheel with presets
  • Macros: built-in white presets

 

DYNAMIC EFFECTS

  • Pixel patterns: pre-programmed dynamic and static patterns
  • Static colour mode: selection of static colour Manual
  • Colour mode: manual adjustment of intensity, CT, colour correction from knob
  • Auto mode: built-in programs with execution speed adjustment
  • Special features: linear crossfade from a white to any colour and CTO applied on colours

 

BODY

  • Hardware on-board: filter frame, 4 doors barndoor, omega bracket spigot
  • Tilt angle: 360° manual
  • Body: sturdy die-cast aluminium body conceived for long-time durability
  • Body colour: black

 

CONTROL

  • Protocols: DMX512, RDM, WDMX, local knob
  • DMX channels: theatre: 1 / 2 / 4 / 5-1/ 5-2 / 6 / 10 / 15 / 17 – tour: 4 / 6 / 10 / 11 / 15 – pixel: 1 / 2H / 2V / 4H / 4V / 8channel
  • Pixel control: 8 section control
  • W-DMX: included, wireless solution receiver
  • RDM: RDM ready for fixture remote monitor and settings
  • Display: black OLED high resolution display
  • Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
  • Master/Slave: for synchronized operation of more units linked in a chain

 

ELECTRONICS

  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: different dimming curves available
  • Strobe / shutter: 1 – 30 Hz, electronic
  • Operating temperature: -20° ~ +45°
  • Flicker: flicker free operation
  • Selectable PWM: 600~36K Hz

 

ELECTRICAL

  • Power supply: 100-240 V – 50/60 Hz
  • Power consumption (at 230 V): 452W
  • Power consumption (at 120 V): 456W
  • Output (at 230 V): 6 units on a single power line
  • Output (at 120 V): 3 units on a single power line
  • Power factor: pF 0,97 @230 V – pF 0,99 @120 V

 

BATTERY

  • Re-charge connection: connection for external battery throught XLR 4p

 

PHYSICAL

  • Cooling: forced air with low noise fan
  • Suspension and fixing: bracket for truss rigging and hardware for connection of more units
  • Signal connection: Amphenol XLR 5p IN/OUT connectors
  • Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
  • IP rating: 20
  • Dimensions (WxHxD): 819x430x144mm
  • Weight: 15,2kg
ECLPANELTWC_manuale.pdf 2.51 MB
Eclpaneltwc_A4_DATASHEET.pdf 432.48 KB
Eclpaneltwc_DMX_CHARTS.pdf 75.61 KB
No case studies found.