Power Tiny Fogger
A high-output battery-powered fog machine, it’s used on most Hollywood blockbuster movies and top Broadway shows. Extremely reliable – provides 10 minutes of fogging output from a fully charged battery.
The Power-Tiny is the new battery-operated fog generator from Look Solutions. It completes the range of the off-mains operated machines (Tiny-Fogger and Tiny Compact) perfectly and fills the gap between high flexibility and powerful fog output. In the world of theatre, film, TV- and photographers, musicals and special effects, air flow and air tightness testing – everywhere where fog is needed quickly and efficiently, the Power-Tiny is the perfect alternative to normal fog generators.
Downloads
Datasheets
Case Studies
Related Products
-
Read more -
Read more -
The Viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power. Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.DMX 512 as standard The VIPER 2.6 can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the VIPER 2.6 to be used in both small and large locations. Connector for external fan An external fan with max. 800 Watt can be connected to the VIPER 2.6. Once connected to the machine, the fan can also be adjusted via DMX. The machine then uses two following channels at the desk. Read more -
The ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time. At the moment, the ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time. Due to its enormous power and the strong output very large halls and even stadiums can be filled with fog. The ORKA is the perfect machine for Events, Concerts, Special effects, Theme parks, large TVand Film-Studios and for Fire brigades or Disasters control examinations. The compact dimensions and the robust housing of the machine make it suitable for touring use. Product Features • Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. • Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the ORKA to be used in both small and large locations. • DMX 512 as standard The ORKA can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. If an external fan is connected to the machine it can be controlled separately via DMX as well and can be used as a wind machine. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLRplugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. • Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. • Connector for external fan An external fan with max. 800 watts can be connected to the ORKA. Fluid The following Look-fog fluids are available for the ORKA: · Quick-Fog (thick, quick disappearing fluid) · Regular-Fog (thick, long lasting fluid) · Slow-Fog (thick, extremly long lasting fluid) Read more