Fog
Showing 1–12 of 16 resultsSorted by latest
-
The OctaJet is a new, innovative device that can replace conventional CO2jets. By using a fog fluid that dissolves extremely quickly, the use of CO2is completely eliminated. This saves both costs and unnecessary organization and logistics. The OctaJet can be used/installed in any direction vertically upwards, upside down, tilted sideways, 45°).Thus, the OctaJet is the perfect device for large events, concerts, amusement parks, etc. Wherever surprising effects are to be achieved, the OctaJet is in the right place. Product Features: Exact setting of the output time The time for the jet shot (Shot time) can be set from 100 milliseconds to 2 seconds (in 100 millisecond increments).This allows an identical time to be set for multiple units to better synchronize short shots. If the time is set to off, the fog duration can be freely determined via DMX. Setting of the output height The output height of the OctaJet is determined by means of pressure. The output height can be set in four levels. The selection of the pressure level (low, medium, high, max) determines the height of the jet shot. Touchscreen The large touchscreen with simple menu navigation allows the desired settings to be made quickly and intuitively. New control options In addition to control via DMX 512, control via Ethernet (Artnet and sACN) is also possible. Manual operation is also possible. Here, the time for the jet shot is set directly on the device. The fogging process is started by briefly pressing the start button. RDM Various information can be read via RDM. The built-in sensors for preheat, energy, heating temperature, pressure, tank level and jet time can also be read out via RDM Internal 2L tank The integrated 2L tank has several sensors that indicate the level of the tank in four steps. Internal Operating hours counter Records the running time of the pump, heating element and device. Connector for external tank If the OctaJet is installed in the truss, an external tank can be connected. Fluid The OctaJet achieves optimal results with the Jet-Fluid. CODE: LOKJCE275 Look Jet Fluid 5L -
The Cryo-Gate is a compact device that mates up to any professional fogger. It enables the user to temporarily transform their existing fogger into a low fog generator. To be used with CO2-high pressure bottles. The Cryo-Gate sits in front of the fogger‘s nozzle. A high-pressure dip-tube siphon CO2 tank connects to the unit and allows the user to add a variable amount of CO2 and air to the fog‘s output. The result is a cold fog that stays low. A tube (Ø 200 mm) can be connected to the front of the Cryo-Gate to guide the fog into the requested direction. The tube can be around ten meters long, allowing to place the machine away from the stage to avoid disturbing noise. Holes at the Cryo-Gate ease mounting it to a rack or building it into a flightcase. Product Features: Can be used with fog generators that have been already bought Ethernet, DMX 512, analogue (0 – 10 V) and manual control Several adjustments (Air, CO2- and fog output) Adjustments made via Touchscreen Compact Connector for tube CO2 high pressure bottles can be rented nearly everywhere Also available without flightcase Made in Germany -
The ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time. At the moment, the ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time. Due to its enormous power and the strong output very large halls and even stadiums can be filled with fog. The ORKA is the perfect machine for Events, Concerts, Special effects, Theme parks, large TVand Film-Studios and for Fire brigades or Disasters control examinations. The compact dimensions and the robust housing of the machine make it suitable for touring use. Product Features • Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. • Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the ORKA to be used in both small and large locations. • DMX 512 as standard The ORKA can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. If an external fan is connected to the machine it can be controlled separately via DMX as well and can be used as a wind machine. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLRplugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. • Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. • Connector for external fan An external fan with max. 800 watts can be connected to the ORKA. Fluid The following Look-fog fluids are available for the ORKA: · Quick-Fog (thick, quick disappearing fluid) · Regular-Fog (thick, long lasting fluid) · Slow-Fog (thick, extremly long lasting fluid) -
The Cobra 3.1 is a powerful fog generator, that sets new Standards concerning noise and handling. The new Touchscreen makes the handling of the Cobra 3.1 easy and intuitive. Operation via Ethernet and RDM-features allow most exible use. The machine is supplied with a duct adaptor that also functions as a protection against contact. Features •230V only • New, extremely silent nozzle with its newly developed nozzle the machine works very silently. The noise level at full output is 82.5 dBA (in comparison: the Viper 2.6 with 2600 Watt generates at full output 100.5 dBA). The nozzle can be unscrewed and cleaned as needed. • Two pumps for constant output The use of two pumps ensures a very constant fog output at any pump level. Therefore the continuous output up to 30% pump level is regulated from one pump, levels from 31% to 100% are regulated by a second, more powerful pump. • New Touchscreen All adjustments can be made easily and intuitive via the big Touchscreen with simple menu navigation. • New controls Besides the stand-alone, analogue and DMX 512 control, the machine can also be operated via Ethernet (Artnet and sACN). • RDM-capable The Cobra 3.1 is equipped with the following RDM-features: — Status: Ready, Re-heating, Error messages (E-1, E-2 etc) — DMX-Patch — Temperature: Heating element, PCB — Adjusting the Personality — General Informations about the machine Newly developed, extremely silent nozzle constant, steady Output DMX, Ethernet, RDM Made in Germany • Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 – 100%. Thus, any desired effect – from a tiny fog cloud to the thickest continuous fog – can be produced. This allows an individual adaptation to the dimensions of the room. • Adjustable Pump characteristic Depending on the use of the Cobra 3.1 and the desired effect, the user can choose between four different pump characteristics: Impulse, Extended, Flood and Continuous. The output and fogging time varies depending on the choo- sen pump characteristic. • Adjustable Performance curve For nest adjustments of the pump from 0% – 30%. In these- pump levels, the performance curve can be regulated 5% up or down, if the same output is needed at several machines or the aging process influences the output. Thus, different fog amounts can be balanced. • Internal Timer With the internal timer, the fogging time can be adjusted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated. •Working hours counter The Cobra 3.1 is equipped with a working hours counter, that saves heating and fogging durations. Liquid The following Look fog liquids are available for the Cobra 3.1: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long-lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid) -
Smaller, quieter, and capable of taking low-fog to more locations—the live event industry’s leading low-fog machine returns with its most significant upgrade in over a decade. JEM Professional Glaciator Dynamic is your complete solution for creating dense, billowy clouds of low-lying fog in any venue without the use of industrial gases or ice. Achieve lush fog on stage with longer-lasting effects. Reduce noise with near-silent operation, perfect for theatrical applications. Enjoy more room backstage with an all-new, more compact design. And tour the world with an updated universal power supply. With a full range of premium accessories, three low-fog fluid types to choose from, and streamlined user controls, you can create dramatic atmospheric effects for your production in moments. Just plug in, set the stage, and amaze. Completely self-contained low-fog system—no industrial gases or ice Closed-loop refrigeration for colder, dense, longer-lasting low-fog Ultra-quiet operation, including low ambient noise in standby Features All-in-one, self-contained solution without the need for external fans, industrial gas tanks, or ice All-new Electronic Inverter Drive for improved effects and lower ambient noise Fill your stage with low-fog thanks to continuous 80 m³ (2825 ft³) per-minute output Even smaller, compact service-friendly design: 785 x 648 x 769 mm (30.9 x 25.5 x 30.2 in.) World touring capabilities via a universal power supply that operates at 208-250 V, 50/60 Hz Onboard industry standard DMX connectivity (both 3- and 5- pin) for control and integration Intuitive user interface with Fast Access Keypad for fast, easy manipulation of low-fog output 180° Low-fog outlet engineered for a smooth, consistent low-fog field Achieve diverse effects with three premium fluid options Simple, one-touch fluid priming 5 l internal fluid reservoir provides an hour of continual consistent low-fog output -
The CRYO-FOG is a powerful low fog machine. A fog generator, a fan and a cooling chamber build into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to held a 5ltr can of fluid.Liquid CO 2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly. The machine is powerful enough to fill even big stages with low fog within a short time. The liquid CO 2 is delivered from a low pressure tank (20 – 24 Bar), which is connected to the machine via a hose. For more information about our low for generator that can be used with high pressure bottles, see CRYO-FOG High Pressure. The intelligent technology ensures that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no “warm” fog – which will go upwards – can escape from the machine. The CRYO-FOG benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation. Fog generator, fan and cooling system in a compact case DMX as standard, analogue (0 – 10V) and stand-alone-Mode In the DMX-Mode the pump, the fan and the CO 2-valve can be adjusted separately Can be used as a “normal” fog generator in DMX-Mode Low fogging process starts automatically only if the cooling chamber has reached the right temperature Easy handling Powerful output Fogging output adjustable in steps of 1% from 0 – 99% Continuous output Easy bottle changing with quick-out connectors Made in Germany -
The VIPER NT unites the current digital technology with proven technique and power. Several features guarantee a simple operation – place and fog, reducing the amount of time needed to set up the machine.DMX 512 as standard The VIPER NT can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the viper nt to be used in both small and large locations. -
The Viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power. Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.DMX 512 as standard The VIPER 2.6 can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the VIPER 2.6 to be used in both small and large locations. Connector for external fan An external fan with max. 800 Watt can be connected to the VIPER 2.6. Once connected to the machine, the fan can also be adjusted via DMX. The machine then uses two following channels at the desk. -
The VIPER S with 650 Watt and a powerful output of approx. 8 meters perfectly completes the Viper range.This fog generator with 650 Watt and an powerful output of approx. 8 meters perfectly completes the Viper range. The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses. The Viper S is characterised ba a low power- and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy-saving without cutting back the output. Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternative to bigger machines. DMX as standard, analog and stand-alone-mode Internal timer Fog output adjustable in steps of 1% (0 – 99%) Continuous output Easy handling Powerful output Made in Germany -
The Tiny S is the latest version of the successful Tiny series. In addition to the fluid reservoir also the battery can now be screwed directly into the machine.Thus, any external cable or fluid tube is not longer necessary and the Tiny S consists of only one component. In the field of special effects, equipment for theatre, musicals and movies, individual solutions for placing fog effects are often needed. Until now, many great ideas have failed due to the size, lack of flexibility and price. In the field of air flow measurements/visualisation and Blower-door-testing, the fog flow – even from the machines of the Tiny series (Tiny CX or Tiny FX) – often was too strong. At the Tiny S with its 30 Watt, the output could be reduced again. Ideal for any kind of air flow measurements. The solution The Tiny S is called tiny, and its dimensions truly are tiny (L = 10.3 cm, W = 5.1 cm, H = 3.5 cm). In this small package, technology of outstanding performance has been realised. The Tiny S is a fog generator that fills the gap, due to its small size and its programmability.. The generator With the small dimensions and the light weight of only 250 grams (incl. battery and fluid tank), this little gadget can be easily used where small amounts of fog are desirabled. The heart of the generator is a microprocessor which controls the fog emission. State of the Art technology opens a wide field of applications to the user. For some applications it will be useful to program in a fixed fog amount. This can be done directly at the machine. The programmed fog amount can easily be reproduced and/or changed. A compact battery, which is screwed into the machine, supplies the Tiny S with the 3.7 V supply. Because of an intelligent control mechanism the battery supplies energy only when necessary. Thus the fog time is greatly increased compared to other battery powered machines. Control The Tiny S is triggered with a start button which is integrated into the lid of the machine. Also you can trigger the generator with the supplied cable remote. The remote will be connected to the machine by using a mini-stereo-jack cable. Minimal fluid consumption The fluid reservoir for the generator will be supplied ready to use and filled with Tiny-Fluid. The reservoir will be simply screwed into the machine. The reservoirs can be refilled and therefor can be used several times. The Tiny-Fluid ensures dense fog is produced with the lowest of fluid consumption (approx. 0.5 ml/min. at continuous output). Service The vaporizer of the machine can be easily changed by the user on site. -
This fog generator is called tiny, and its dimensions truly are tiny. In a small package (L = 9.8, W = 4.4, H = 3.4 cm) technology of outstanding performance has been realised. The TINY FX is the latest, modified successor of the Tiny F07. The design and also some components have been changed: Due to the installation of a smaller, efficient pump, dimensions and weight could be reduced again.The fluid reservoir can be screwed directly into the machine. Thus, an external fluid tank and fluid tube are not necessary and the TINY FX only has two components: machine and battery pack. The solution The TINY FX is called tiny, and its dimensions truly are tiny. In a small package (L = 9.8, W = 4.4, H = 3.4 cm) technology of outstanding performance has been realised. The TINY FX is a fog generator that fills the gap, due to its small size and its programmability. The generator Because of its dimensions and weight (of only 180 grams), this little gadget can be easily built into backdrops, puppets, costumes and props etc. The heart of the generator is a programmable microprocessor which controls fog emission. State of the Art technology opens a wide field of applications to the user. For some applications it will be useful to program in a fixed fog amount. This can be done directly at the machine. The programmed fog amount can easily be reproduced and/or changed. A compact battery (L= 10.5, W= 4.4, H= 4.1 cm) supplies the TINY FX with the 11.1 V supply. The small dimensions and the light weight of 200 grams ensures an easy hiding or installation. The modular design of fog generator and separate rechargeable battery ensure upmost flexibility for individual uses. Because of an intelligent control mechanism the battery supplies energy only when necessary. Thus the fog time is greatly increased compared to other battery powered machines. The control The TINY FX is triggered with a start button which is integrated into the lid. Also you can trigger the machine with the supplied cable remote or optional with a radio remote, a DMX converter or a Timer. The fluid The fluid reservoir for the generator will be supplied ready to use and filled with original Tiny-Fluid. The reservoir will be simply screwed into the machine. The reservoir can be refilled and therefor can be used several times. The Tiny-Fluid ensures dense fog is produced with the lowest of fluid consumption (2.3 ml/Min. at continuous output). Advantages Very small dimensions Battery supplies energy only when necessary Warm up time less than 1 sec. Continuous output Fogging time programmable Minimal fluid consumption Trigger directly at the machine, with cable remote and optionally with radio remote, DMX converter or Timer Carrying case Manufactured in Germany -
Based on the current digital control technology we have designed the Tiny CX. Its easy handling and quick start-up is outstanding. The TINY CX is the latest, modified successor of the TINY C07. Unlike the TINY C07, the TINY CX has a changeable battery. Thus, the machine is even more efficient. If the battery is empty, a new one can simply be inserted without losing time with recharging. The TINY CX is delivered in a carrying case. The machine The TINY CX is a handy, compact battery-driven fog generator. Its easy handling and quick start-up is outstanding. With its warming up time of less than a second, its light weight (630 grams) and the small dimensiond (L= 25, W= 5.3, H= 5.5 cm), this machine is applicable in many fields of operation. In the world of theatre, film, TV and photographers, musicals and special effects, air flow and air tightness testing – everywhere where fog is needed quickly and unobtrusively, the TINY CX is the perfect alternative to normal fog machines. The technology All components of the machine have been built into a small and robust case. Just like the TINY FX, the heart of this machine is a microprocessor which controls and supervises all important functions. This guarantees a continuous and safe running of the generator. A compact battery (L = 10.5, W = 4.4, H = 4.1 cm) supplies the TINY CX with the 11.1 V supply. The battery can be inserted into the machine and can be easily changed if necessary. Because of an intelligent control mechanism the battery supplies energy only when necessary. Thus the operating time is greatly increased compared to other battery-powered machines. The operation The TINY CX is ready to go directly. Only the battery has to be inserted and the fluid tank, which is fitted to the housing, has to be filled with original Tiny-fluid. The fogging process can be started immediately and continuously. With the internal battery you can produce up to 10 – 15 minutes of continuous output or up to 150 puffs of 5 sec. The TINY CX can easily be triggered with one hand. The start button is placed in the machines lid and can be pressed with the thumb. The fluid The Tiny-fluid ensures that dense fog is produced with the lowest of fluid consumption (2.3 ml/min. at continuous output). The control (Option) The TINY CX can be optional controlled in the following ways: With a radio remote control or cable remote. With a DMX-converter the machine can be triggered via DMX 512. With a Timer you can programme in the fogging time and the fog-free time. Advantages Small dimensions, light weight Battery supplies energy only when necessary Warm up time less than 1 second Continuous output Lowest fluid consumption Changeable battery Triggered with the start button or the optional radio remote, DMX-converter and timer Manufactured in Germany