Showing 325–336 of 440 resultsSorted by latest
-
Ether2DMX8 is a highly capable DMX router and much more! As a DMX router, it translates Artnet protocol into DMX in/out universes but can also be used as a DMX merger, DMX splitter hub, fail safe device, cue playback, and DMX viewer monitor. Ether2DMX8 is also an M-PC license and therefore a full controller solution. The Martin Ether2DMX8 allows users to increase the number of DMX universes and/or easily place DMX universes remotely on any TCP/IP Ethernet network. The Ether2DMX8 is useful for the following applications: Extend the number of DMX universes of the Maxxyz console. Every Ether2DMX8 box extends the number of universes by eight. Up to 8 Universes with M-PC Basic, 16 universes can therefore be reached on a Martin M1; 32 universes on the Maxxyz Compact and Maxxyz (+); and 64 universes on M-PC Pro and with any Maxedia system. Furthermore, the Ether2DMX8 contains a full M-PC License. No need for external dongle! Place your DMX controller remotely. By using the Ether2DMX8 your DMX universes can be placed at a remote location, connected to the controller by a single Ethernet line (RJ45). Extend the number of DMX inputs or have DMX inputs placed at a remote location. Use it as an output device for any Maxxyz controller including Maxxyz PC.
-
The Martin DMX 5.3 and RDM 5.5 Splitters are the most economical devices available to ensure proper data transmission levels and protect controllers and DMX/RDM devices. Both Splitters are useful in maintaining proper data levels over long runs or several runs of DMX signal with the RDM 5.5 Splitter also capable of effectively handling RDM data. Both the DMX 5.3 Splitter and RDM 5.5 Splitter help to rectify disruptions in the DMX signal caused by bad cables or bad connections by splitting the DMX or DMX/RDM data link into five separate branches while boosting the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Through fully individual isolated input and 5 outputs, the Martin Splitters will protect any DMX controller and DMX fixture against voltage surge on the data line.
-
With the increasing requirements of clients and designers in both fixed installations and events/concerts, the need for sophisticated solutions for signal transportation and data distribution is inevitable. Also, latest technical developments and requirements have to be met. The MA 8Port Node, MA 4Port Node,MA 4Port Node WM (Wall Mount), MA 2Port Node, MA 2Port Node WM (Wall Mount) set an additional benchmark in MA Lighting’s networking product range as they feature the 1Gbit/s bandwidth capability. They allow the conversion of Ethernet data into DMX or vice versa and fit perfectly into the grandMA2 system and its MA-Net2 protocol, which is based on this high speed to ensure maximum performance. Optimised for touring and installation purposes, all products have a rugged steel housing for a long life even under harsh conditions. The Nodes offer a menu button, a USB connector and a 2″ colour TFT as well as LEDs displaying the current status. All of these ensure a comfortable operation. The MA xPort Nodes are fully configurable from the grandMA2 consoles or from grandMA2 onPC. To achieve the highest flexibility, each DMX port can be individually configured as DMX in or DMX out. Furthermore all MA xPort Nodes are available as an onPC version to provide parameters for standalone onPC stations (for more details see: MA onPC solutions). The MA 8Port Node is the perfect solution for converting a large amount of DMX universes at the same location. The MA 8Port Node offers the same amount of DMX universes like a MA NPU (Network Processing Unit). All eight DMX outputs as well as the main switch, one powerCON and one etherCON connector are located at the rear side of the node. The MA 8Port Node comes as a 19″/1HU version for rack use. Speaks MA-Net2, Art-Net and sACN via 1Gbit/s connection Fully configurable from a grandMA2 console/grandMA2 onPC 2″ colour TFT display Rugged steel housing for flexible use or mobile applications Also available as onPC version to unlock output parameters (see MA onPC solutions)
-
MA 4Port Node onPC can be used in combination with the free-of-charge grandMA2 onPC software running on a computer to provide 2,048 parameters each. MA 4Port Node onPC, for parameter expansion. Optimised for touring and installations purposes, both have a rugged steel housing for a long life even under harsh conditions. The front panel offers a menu button, a USB connector and a 2” colour TFT as well as LEDs displaying the current status. All of these ensure a comfortable operation. The mains switch is located on the back, along with the powerCON and etherCON connectors, as well as the eight (MA 8Port Node onPC) and four (MA 4Port Node onPC) DMX ports. Both Nodes are fully configurable from grandMA2 onPC. As sophisticated networking tools for signal transportation and data distribution the MA xPort Nodes and the MA xPort Nodes WM are available. The MA 4Port Node is available in different fittings for adapting to multiple applications. First there is the basic version based on a 9″/1HU housing, where all connectors are located on the back. Additionally an add-on fitting is available to mount this basic version into a 19″ rack. Second a special fitting can be used where all connectors on the back of the MA 4Port Node are mirrored on an additional front panel for an easier access when rackmounted. Third possibility is to combine two MA 4Port Node for rack use by adding rack mounting brackets and a special threaded fastener between the two single MA 4Port Node units. Fourth option is the additionally available rigging plate for mounting couplers or clamps on the MA 4Port Node.
