Orka

Categories: , , , , , SKU: LOKFOG160

The ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time.

Description

At the moment, the ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time.
Due to its enormous power and the strong output very large halls and even stadiums can be filled with fog.
The ORKA is the perfect machine for Events, Concerts, Special effects, Theme parks, large TVand Film-Studios and for Fire brigades or Disasters control examinations.
The compact dimensions and the robust housing of the machine make it suitable for touring use.

Product Features

• Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

• Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be
produced. This enables the ORKA to be used in both small and large locations.

• DMX 512 as standard
The ORKA can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved
via the control panel. If an external fan is connected to the machine it can be controlled separately via DMX as well and can be used as a wind machine.

The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLRplugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.

• Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

• Connector for external fan
An external fan with max. 800 watts can be connected to the ORKA.

Fluid
The following Look-fog fluids are available for the
ORKA:
· Quick-Fog (thick, quick disappearing fluid)
· Regular-Fog (thick, long lasting fluid)
· Slow-Fog (thick, extremly long lasting fluid)

Procedure: Vaporizing fog machine
Power requirement: 9000 Watt / 8320 Watt (208 V)
Voltage: 400 V / 50 Hz / 16 A CEE, 1 x 208 V / 60 Hz / 40 A (USA)
Warm up time: approx. 15 min.
Fluid consumption: 500 ml/min. at 100% output, 145 ml/min. at continuous output
Fluid tank capacity: 5 litre
Fog output adjustable in 99 steps
Output projection: max. 30 m
Fogging time: approx. 2 min. at max. output, at < 50% continous output
Temperature control: Microprocessor controlled
Overheating protection: Heater block/thermostat, Pump/Thermal switch
Control: DMX 512, 0 – 10 V analog
Dimensions: (L x W x H)55 x 37 x 28 cm
Weight: 35 kg incl. canister
Delivery includes: 5L canister Regular-Fog

   
   
There are no downloads available for this product!

DIDN’T FIND WHAT YOU’RE LOOKING FOR?