Power Tiny Fogger
A high-output battery-powered fog machine, it’s used on most Hollywood blockbuster movies and top Broadway shows. Extremely reliable – provides 10 minutes of fogging output from a fully charged battery.
The Power-Tiny is the new battery-operated fog generator from Look Solutions. It completes the range of the off-mains operated machines (Tiny-Fogger and Tiny Compact) perfectly and fills the gap between high flexibility and powerful fog output. In the world of theatre, film, TV- and photographers, musicals and special effects, air flow and air tightness testing – everywhere where fog is needed quickly and efficiently, the Power-Tiny is the perfect alternative to normal fog generators.
Downloads
Datasheets
Case Studies
Related Products
-
The Cryo-Gate is a compact device that mates up to any professional fogger. It enables the user to temporarily transform their existing fogger into a low fog generator. To be used with CO2-high pressure bottles. The Cryo-Gate sits in front of the fogger‘s nozzle. A high-pressure dip-tube siphon CO2 tank connects to the unit and allows the user to add a variable amount of CO2 and air to the fog‘s output. The result is a cold fog that stays low. A tube (Ø 200 mm) can be connected to the front of the Cryo-Gate to guide the fog into the requested direction. The tube can be around ten meters long, allowing to place the machine away from the stage to avoid disturbing noise. Holes at the Cryo-Gate ease mounting it to a rack or building it into a flightcase. Product Features: Can be used with fog generators that have been already bought Ethernet, DMX 512, analogue (0 – 10 V) and manual control Several adjustments (Air, CO2- and fog output) Adjustments made via Touchscreen Compact Connector for tube CO2 high pressure bottles can be rented nearly everywhere Also available without flightcase Made in Germany Read more -
-
Read more -
The Cobra 3.1 is a powerful fog generator, that sets new Standards concerning noise and handling. The new Touchscreen makes the handling of the Cobra 3.1 easy and intuitive. Operation via Ethernet and RDM-features allow most exible use. The machine is supplied with a duct adaptor that also functions as a protection against contact. Features •230V only • New, extremely silent nozzle with its newly developed nozzle the machine works very silently. The noise level at full output is 82.5 dBA (in comparison: the Viper 2.6 with 2600 Watt generates at full output 100.5 dBA). The nozzle can be unscrewed and cleaned as needed. • Two pumps for constant output The use of two pumps ensures a very constant fog output at any pump level. Therefore the continuous output up to 30% pump level is regulated from one pump, levels from 31% to 100% are regulated by a second, more powerful pump. • New Touchscreen All adjustments can be made easily and intuitive via the big Touchscreen with simple menu navigation. • New controls Besides the stand-alone, analogue and DMX 512 control, the machine can also be operated via Ethernet (Artnet and sACN). • RDM-capable The Cobra 3.1 is equipped with the following RDM-features: — Status: Ready, Re-heating, Error messages (E-1, E-2 etc) — DMX-Patch — Temperature: Heating element, PCB — Adjusting the Personality — General Informations about the machine Newly developed, extremely silent nozzle constant, steady Output DMX, Ethernet, RDM Made in Germany • Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 – 100%. Thus, any desired effect – from a tiny fog cloud to the thickest continuous fog – can be produced. This allows an individual adaptation to the dimensions of the room. • Adjustable Pump characteristic Depending on the use of the Cobra 3.1 and the desired effect, the user can choose between four different pump characteristics: Impulse, Extended, Flood and Continuous. The output and fogging time varies depending on the choo- sen pump characteristic. • Adjustable Performance curve For nest adjustments of the pump from 0% – 30%. In these- pump levels, the performance curve can be regulated 5% up or down, if the same output is needed at several machines or the aging process influences the output. Thus, different fog amounts can be balanced. • Internal Timer With the internal timer, the fogging time can be adjusted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated. •Working hours counter The Cobra 3.1 is equipped with a working hours counter, that saves heating and fogging durations. Liquid The following Look fog liquids are available for the Cobra 3.1: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long-lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid) Read more
