Related Products
-
The OctaJet is a new, innovative device that can replace conventional CO2jets. By using a fog fluid that dissolves extremely quickly, the use of CO2is completely eliminated. This saves both costs and unnecessary organization and logistics. The OctaJet can be used/installed in any direction vertically upwards, upside down, tilted sideways, 45°).Thus, the OctaJet is the perfect device for large events, concerts, amusement parks, etc. Wherever surprising effects are to be achieved, the OctaJet is in the right place. Product Features: Exact setting of the output time The time for the jet shot (Shot time) can be set from 100 milliseconds to 2 seconds (in 100 millisecond increments).This allows an identical time to be set for multiple units to better synchronize short shots. If the time is set to off, the fog duration can be freely determined via DMX. Setting of the output height The output height of the OctaJet is determined by means of pressure. The output height can be set in four levels. The selection of the pressure level (low, medium, high, max) determines the height of the jet shot. Touchscreen The large touchscreen with simple menu navigation allows the desired settings to be made quickly and intuitively. New control options In addition to control via DMX 512, control via Ethernet (Artnet and sACN) is also possible. Manual operation is also possible. Here, the time for the jet shot is set directly on the device. The fogging process is started by briefly pressing the start button. RDM Various information can be read via RDM. The built-in sensors for preheat, energy, heating temperature, pressure, tank level and jet time can also be read out via RDM Internal 2L tank The integrated 2L tank has several sensors that indicate the level of the tank in four steps. Internal Operating hours counter Records the running time of the pump, heating element and device. Connector for external tank If the OctaJet is installed in the truss, an external tank can be connected. Fluid The OctaJet achieves optimal results with the Jet-Fluid. CODE: LOKJCE275 Look Jet Fluid 5L Read more -
Read more -
The Look-Fan DMX is a powerful fan with 850 Watt. It can be used where fog needs to be distributed quickly and constant or where a strong wind effect is needed. The supplied hanging yoke guarantees a flexible use and can be adjusted in every needed angle The Look-Fan DMX can also be build onto a stand The fan is controllable via DMX and can be adjusted from 0 to 99%. The lead time up to maximum speed is only 2.5 seconds The DMX start-address can be adjusted and saved in the internal display The output power can also be adjusted in this display, along with start or stop functions Read more -
The Viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power. Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.DMX 512 as standard The VIPER 2.6 can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the VIPER 2.6 to be used in both small and large locations. Connector for external fan An external fan with max. 800 Watt can be connected to the VIPER 2.6. Once connected to the machine, the fan can also be adjusted via DMX. The machine then uses two following channels at the desk. Read more