Cryo Gate
The Cryo-Gate is a compact device that mates up to any professional fogger. It enables the user to temporarily transform their existing fogger into a low fog generator. To be used with CO2-high pressure bottles.
The Cryo-Gate sits in front of the fogger‘s nozzle. A high-pressure dip-tube siphon CO2 tank connects to the
unit and allows the user to add a variable amount of CO2 and air to the fog‘s output. The result is a cold fog that
stays low.
A tube (Ø 200 mm) can be connected to the front of the Cryo-Gate to guide the fog into the requested direction.
The tube can be around ten meters long, allowing to place the machine away from the stage to avoid disturbing noise.
Holes at the Cryo-Gate ease mounting it to a rack or building it into a flightcase.
Downloads
Datasheets
Case Studies
Related Products
-
The VIPER S with 650 Watt and a powerful output of approx. 8 meters perfectly completes the Viper range.This fog generator with 650 Watt and an powerful output of approx. 8 meters perfectly completes the Viper range. The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses. The Viper S is characterised ba a low power- and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy-saving without cutting back the output. Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternative to bigger machines. DMX as standard, analog and stand-alone-mode Internal timer Fog output adjustable in steps of 1% (0 – 99%) Continuous output Easy handling Powerful output Made in Germany Read more -
Read more -
Read more -
The VIPER NT unites the current digital technology with proven technique and power. Several features guarantee a simple operation – place and fog, reducing the amount of time needed to set up the machine.DMX 512 as standard The VIPER NT can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the viper nt to be used in both small and large locations. Read more