OctaJet
The OctaJet is a new, innovative device that can replace conventional CO2jets. By using a fog fluid that dissolves extremely quickly, the use of CO2is completely eliminated. This saves both costs and unnecessary organization and logistics.
Downloads
Datasheets
Related Products
-
Read more -
The VIPER NT unites the current digital technology with proven technique and power. Several features guarantee a simple operation – place and fog, reducing the amount of time needed to set up the machine.DMX 512 as standard The VIPER NT can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the viper nt to be used in both small and large locations. Read more -
The Look-Fan S is a powerful fan with 150 watts. It can be used wherever mist needs to be distributed quickly and evenly or a strong air flow is desired. The hanging bracket installed as standard ensures flexible use and can be fixed at any angle of inclination. The Look-Fan S can also be attached to a tripod and therefore used as a stand fan. The fan can be controlled via DMX and adjusted from 0 to 99%. The start-up time to maximum speed is approx. 12 seconds. The DMX start address can be set and saved via the integrated display. The Look-Fan S can also be controlled and started or stopped manually. Read more -
Read more