ShowPRO
LED Profile VW500

LED Profile VW500

SKU: LEDPRO135
Category: , , , ,

The LED Profile VW500 features an exceptionally powerful 500W RGBAL LED engine, allowing for considerable brightness, surpassing older 1000W conventional fixtures.
It features complete independent control of all discrete colour sources, and a preset colour temperature range of 2800K to 8000K. Boasting a high CRI of 95 and quiet operation through selectable fan modes, it is suitable for all live and studio applications.

Read more

Downloads

Manuals

Datasheets

Fixture Library

Add to enquiry list

Case Studies

Big Live Co Push Boundaries with Ayrton, ShowPRO & MA

Related Products

  • LED Apollo 6 Units inc Charging Case (Black)

    Battery-powered, outdoor-rated RGBW LED high-output uplights that go anywhere you go, cable-free. Wireless DMX or infrared remote control. In a six-piece road-worthy charging case. Also available in chrome. LED WIRELESS BATTERY UPLIGHT SYSTEM (6 x APOLLO units + 1 x Charging case) 4 x 12W RGBW LED IP65: Designed for both indoor and outdoor use 8 hours continuous battery-powered operation at full output, 20 hours at single colour Onboard wireless DMX 3-channel Hue-Saturation-Value and Hue-Saturation-Intensity modes Ultra-linear dimming technology for flawless colour mixing Patented structural design delivers superior passive cooling High frequency 1200 Hz LED modulation for flicker-free output Adjustable white balance Patented structural design delivers superior passive cooling Charging station in rugged touring case holds 6 units Password protected key lock Black finish Threaded receiver for clamp mounting Wireless DMX, Manual, Standalone (Auto Shows), Master/Slave, IR control Read more
    Add to enquiry list
  • LED Quad-18 Barndoor

    LED Quad-18 Barndoor

    Read more
    Add to enquiry list
  • PSHDMX250 2

    DMX Cable 5Pin

    DMX Cable 5Pin for reliable signal transmission between lighting fixtures, controllers and other DMX-compatible equipment. Available Sizes: PSHDMX201 – DMX Cable 1m 5Pin PSHDMX200 – DMX Cable 1.5m 5Pin PSHDMX202 – DMX Cable 2m 5Pin PSHDMX203 – DMX Cable 3m 5Pin PSHDMX205 – DMX Cable 5m 5Pin PSHDMX210 – DMX Cable 10m 5Pin PSHDMX220 – DMX Cable 20m 5Pin PSHDMX230 – DMX Cable 30m 5Pi PSHDMX250 – DMX Cable 50m 5Pin PSHDMX299 – DMX Cable 100m 5Pin Read more
    Add to enquiry list

  • 8 Way RDM/DMX Splitter Neutrik RJ45

    The 8 WAY RDM/DMX SPLITTER NEUTRIK RJ45 is a transparent in-line RDM splitter used for connecting a large number of RDM devices such as moving lights, LED Luminaires, smoke machines, dimmers etc It may also be used as a DMX splitter in a DMX only system, or as a filter in an RDM system to prevent RDM commands affecting legacy DMX devices. It provides bi-directional transfer of data according to the RDM ENSA standard between its floating input (RDM “response” port) and its 8 isolated outputs (RDM “command” ports). The RDM8 is compatible with protocols ANSI E1.11 (DMX) and ANSI E1.20 (RDM). Product Features: Floating input with through connector LED indicator for RDM/DMX signal input 8 outputs, each isolated to 500VDC from Earth, from each other, and from the input LED indicator for RDM/DMX signals on each output, active both transmitting and receiving Power good LED indicator All outputs use 5 volt RS485 drivers for maximum signal drive and integrity Read more
    Add to enquiry list