Look Cryo-Fog Fluid 5L
Downloads
Datasheets
Related Products
-
The VIPER NT unites the current digital technology with proven technique and power. Several features guarantee a simple operation – place and fog, reducing the amount of time needed to set up the machine.DMX 512 as standard The VIPER NT can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the viper nt to be used in both small and large locations. Read more -
The Tiny S is the latest version of the successful Tiny series. In addition to the fluid reservoir also the battery can now be screwed directly into the machine.Thus, any external cable or fluid tube is not longer necessary and the Tiny S consists of only one component. In the field of special effects, equipment for theatre, musicals and movies, individual solutions for placing fog effects are often needed. Until now, many great ideas have failed due to the size, lack of flexibility and price. In the field of air flow measurements/visualisation and Blower-door-testing, the fog flow – even from the machines of the Tiny series (Tiny CX or Tiny FX) – often was too strong. At the Tiny S with its 30 Watt, the output could be reduced again. Ideal for any kind of air flow measurements. The solution The Tiny S is called tiny, and its dimensions truly are tiny (L = 10.3 cm, W = 5.1 cm, H = 3.5 cm). In this small package, technology of outstanding performance has been realised. The Tiny S is a fog generator that fills the gap, due to its small size and its programmability.. The generator With the small dimensions and the light weight of only 250 grams (incl. battery and fluid tank), this little gadget can be easily used where small amounts of fog are desirabled. The heart of the generator is a microprocessor which controls the fog emission. State of the Art technology opens a wide field of applications to the user. For some applications it will be useful to program in a fixed fog amount. This can be done directly at the machine. The programmed fog amount can easily be reproduced and/or changed. A compact battery, which is screwed into the machine, supplies the Tiny S with the 3.7 V supply. Because of an intelligent control mechanism the battery supplies energy only when necessary. Thus the fog time is greatly increased compared to other battery powered machines. Control The Tiny S is triggered with a start button which is integrated into the lid of the machine. Also you can trigger the generator with the supplied cable remote. The remote will be connected to the machine by using a mini-stereo-jack cable. Minimal fluid consumption The fluid reservoir for the generator will be supplied ready to use and filled with Tiny-Fluid. The reservoir will be simply screwed into the machine. The reservoirs can be refilled and therefor can be used several times. The Tiny-Fluid ensures dense fog is produced with the lowest of fluid consumption (approx. 0.5 ml/min. at continuous output). Service The vaporizer of the machine can be easily changed by the user on site. Read more -
Use: Fog- and smoke simulation Chemical characteristic: Mixture of higher alcohols and water Ingredients: Contains no dangerous ingredients (See MSDS in downloads tab for more information)Information about the CLP regulations and Look Solutions fog and haze fluids: The CLP regulations for mixtures are valid from 01.06.2015 on. Look Solutions fog and haze fluids do not contain any of the listed ingredients. Especially none of our products contain Diethylenglycol, which is of great concern. All ingredients used in Look fluid are harmless, and there is no limited value in the air for any of them. Look Solutions products are not classfied under the new CLP regulations Read more -
The UNIQUE 2.1 haze machine is the follow-up model of the original Unique and offers a variety of extra features, which open up new fields of operation for the user.Not only has the design been changed, the UNIQUE 2.1 is also equipped with new features like an Internal Timer and a brand new Haze-Density Control System (HDCS). With this HDCS an individual profile for a show can be programmed. The new, more efficient fan, allows the haze to be evenly distributed throughout the room more quickly while a replaceable filter protects the fan against dirt. Equipped with a variable output feature, the UNIQUE 2.1 can be used in many fields. Any desired effect can be achieved: from the finest mist to a thick haze, similar to fog. Therefore the machine is able to fill small and big rooms or halls with a constant haze, creating the right atmosphere and professionally enhancing lighting effects with a desired haze density. Read more