Unique Hazer 2.1
The UNIQUE 2.1 haze machine is the follow-up model of the original Unique and offers a variety of extra features, which open up new fields of operation for the user.
Not only has the design been changed, the UNIQUE 2.1 is also equipped with new features like an Internal Timer and a brand new Haze-Density Control System (HDCS). With this HDCS an individual profile for a show can be programmed.
Downloads
Datasheets
Case Studies
Related Products
-
The Cryo-Gate is a compact device that mates up to any professional fogger. It enables the user to temporarily transform their existing fogger into a low fog generator. To be used with CO2-high pressure bottles. The Cryo-Gate sits in front of the fogger‘s nozzle. A high-pressure dip-tube siphon CO2 tank connects to the unit and allows the user to add a variable amount of CO2 and air to the fog‘s output. The result is a cold fog that stays low. A tube (Ø 200 mm) can be connected to the front of the Cryo-Gate to guide the fog into the requested direction. The tube can be around ten meters long, allowing to place the machine away from the stage to avoid disturbing noise. Holes at the Cryo-Gate ease mounting it to a rack or building it into a flightcase. Product Features: Can be used with fog generators that have been already bought Ethernet, DMX 512, analogue (0 – 10 V) and manual control Several adjustments (Air, CO2- and fog output) Adjustments made via Touchscreen Compact Connector for tube CO2 high pressure bottles can be rented nearly everywhere Also available without flightcase Made in Germany Read more -
Read more -
The Viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power. Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.DMX 512 as standard The VIPER 2.6 can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the VIPER 2.6 to be used in both small and large locations. Connector for external fan An external fan with max. 800 Watt can be connected to the VIPER 2.6. Once connected to the machine, the fan can also be adjusted via DMX. The machine then uses two following channels at the desk. Read more -
Use: Fog- and smoke simulation Chemical characteristic: Mixture of higher alcohols and water Ingredients: Contains no dangerous ingredients (See MSDS in downloads tab for more information)Information about the CLP regulations and Look Solutions fog and haze fluids: The CLP regulations for mixtures are valid from 01.06.2015 on. Look Solutions fog and haze fluids do not contain any of the listed ingredients. Especially none of our products contain Diethylenglycol, which is of great concern. All ingredients used in Look fluid are harmless, and there is no limited value in the air for any of them. Look Solutions products are not classfied under the new CLP regulations Read more